Bonding agent STUCCO RS
Single-component, nitrosynthetic bonding agent for the preparation of filler by mixing with fine sanding dust…
- Excellent efficiency
- Ideal for quick application
- Easy to sand
Product informations
Single-component, nitrosynthetic bonding agent for the preparation of filler by mixing with fine sanding dust. Fast-drying and easily sanded.
Packaging: 5L
| Destination | Intérieur-6vs5f5jzlyd3 |
|---|
Documents
Preparation
DIRECTIONS
Sand the floor with coarse- and medium-grained sandpaper then prepare the filler, blending
STUCCO RS and the necessary quantity of sawdust from the sanding, to obtain an homogeneous mixture. Spread it quickly using a wide, rustproof metal spatula (American spatula), pushing as much filler as possible into the cracks.
After drying, which normally requires 1 hour, smooth using fine sandpaper, vacuum and wipe up dust carefully, then apply one of our solvent-based finish cycles.
WARNINGS
Do not apply at a temperature below +15 °C. The product itself, before being applied, should reach the room temperature.
To thin, use our DILUENTE V3a thinner.
Clean tools with our DILUENTE LAVAGGIO washing diluent.
Do not dispose of residual product on ground or down drains!
If stored cool and dry, in the original unopened package, the product will keep for at least 12 months.
